3DXSTAT™ ESD-SAFE PLA 3D

3DXSTAT™ ESD-SAFE PLA 3D

SKU: 0021
$2,640.00Precio

*Compra mínima de 5 unidades

3DXSTAT™ ESD-SAFE PLA 3D 1kg

  • ESD PLA is an advanced ESD-Safe compound designed for use in critical applications that require electrostatic discharge (ESD) protection. Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes. Target surface resistance: 10^7 to 10^9 Ohm.
  • Benefits of 3DXSTAT™ include:

    • Ideal for printing without a heated bed - no enclosure required

    • Low shrink / warp - very easy to print

    • Low odor - ideal for printing in public spaces / office environments

    • Consistent and reliable surface resistance

    • Improved retention of impact & elongation vs. similiar ESD-safe materials

    • Low particulate contamination

    • Minimal contribution to outgassing and ionic contamination

    Typical applications include:

    • Semi-con: HDD Components, Housings, Wafer Handling, Jigs, Casings, & Connectors

    • Industrial: Fixtures, Conveying, Metering, End-of-arm Tooling, and Sensing applications

  • Target conductivity for 3DXSTAT™ ESD PLA:

     • Spec: 10^6 to 10^9 Ohm surface resistivity on 3DP sample using concentric ring method, target 10^7 Ohm

    • Note: Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity. Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry. Therefore, expect some trial time to understand how this filament works in your specific printer / application.

  • Recommended Print Conditions:

    • Extruder Temp: Typically 210-220°C. 3DXSTAT™ ESD PLA is a filled product and has a higher melt viscosity vs. unfilled PLA. Therefore, it is sometimes necessary to print at higher temperatures than your standard PLA to allow the resin to flow properly.

    • Extrusion Multiplier: 1.15 - 1.20

    • Extrusion Speed: 60mm/s or higher

    • Bed Temp: 23-60°C

    • Fan Speed: 50-100% starting on 2nd layer

    • Bed Prep: Blue Tape, Hairspray on clean glass